Home | Arts
When you begin an airbrush art project, you will first need to prep the surface. The prep work that you do will be determined by what type of surface you will be airbrushing. The prep work to the surface will ensure that the paint sticks to the surface and that nothing is interfering with the airbrushed design. Skin should be cleaned with rubbing alcohol to remove any oils from the skin. The skin's own natural oils will prevent the airbrush paint from successfully sticking to the skin. This will cause the airbrush art tattoo to come off to soon. The use of talc powder after the design has dried will help to keep oil from building back up and thus still ruining the airbrushed tattoo. Metal should be wet sanded to give a rough grainy effect. This rough grainy effect will help the paint to adhere to the metal. With metal actually being smooth the paint will have a hard time sticking to the smooth surface. This is why it is important to wet sand the metal first. A base coat should be applied to the metal before any airbrush art design is started. Your airbrush parts The air cap and head assembly are on the front of your airbrush and they cover the tip of the needle. The purpose of these parts is to control atomization of the paint spray. Should these parts become dented or damaged in anyway you should replace them immediately. Damage to the air cap and head assembly will effect the performance of your airbrush. Thus like the needle you will be unable to create desirable airbrush art. Both the needle, air cap and head assembly can be purchased at almost any craft or hobby shop that sells airbrushes and airbrush parts. The airbrush trigger is what allows you to actually operate the airbrush. In a single action airbrush the trigger controls the air flow. In a dual action airbrush the trigger controls both the air flow and the paint flow. Beginners should really take the time to practice on how the trigger works so that they can perfect their ability to airbrush. Your airbrush will have a back lever as well that acts to shut off the air flow and paint flow when the trigger is released. If this should be come damaged then you could have serious problems with your airbrush. Don't worry though it is not hard to replace these parts should there be any damage. Airbrush makeup art Airbrush art can also be applied to the body to create temporary tattoos and thus uses the human body as a canvas for an artist's imagination. Cigarette lighters are also being used as a way for artist to show of their airbrush art. The once simple looking lighter is now a display item with awesome art on it. The application of makeup takes time and a lot of practice to be able to do perfectly. The human face is one canvas where an artist does not want to mess up. One must be sure of their abilities with not only the application of the right makeup but also with use of an airbrush to apply those make ups.
Article Source: http://www.philvault.com
Let's get more on fun and entertainment by checking out the following link:fun and entertainment information guide your online family entertainment center.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
