Home | Business
To increase your forest management tasks, Use the hydraulic grapple rake, a versatile new loader/tractor/skid steer attachment, which has a combination of strength, control and flexibility. Even when equipment is used to pick up, move and stack trees, logs, brush or other fire hazards, there are drawbacks whenever management tasks are still being done the old fashioned way: with shovel, chainsaw, and backbreaking sweat. From logging and national park conservation to fire prevention, property and habitat protection. Bucket attachments of the past tend to scoop excess dirt, incapable of holding unwieldy loads, and are largely ineffective for tasks in need of fine control such are raking limbs, or debris. Those who find themselves responsible for managing private and public forestland are now adding a new, versatile attachment - The hydraulic grapple rake - to their skid steers, tractors, and loaders. This new attachment is much more efficient than manual labor, and adapts easier than the bucket. It hydraulically opens, closes, and moves its jaws of spaced metal tines so it can remove trees, logs and brush or surface rake limbs and debris without removing topsoil that is essential in management of lands. No piling up of unnecessary dirt either. This grapple rake can dig out roots and stumps. It can safely pick up, move, and stack logs, trees, or irregular loads up to several thousand pounds. The grapple rake, with it's intertwined teeth, can also grab and place material down to three inches, and reach within inches of desired forest habitat without disturbing it to lift, drag, rake, or haul loads. This attachment can make piles and pick up from the front or lift them from the top, being helpful when loading debris piles onto trailers or preparing piles for burn disposal. In Steamboat, Colorado, Bob Chapman was faced with the enormous task of removing 300 trees because of beetle kill on his 70-acre property. Bob hired a commercial timber company to do the work due to the enormity of the un-welcomed task. "I wondered how they were going to clean up the huge mess without destroying habitat for the living trees and adjoining grassland. I was so impressed with the way a skid steer mounted grapple rake navigated living trees while removing huge loads of debris that I talked the timber company into letting me operate it for a few days." Chapman said "It looked like a war zone, with logs, branches, and stumps everywhere." He used the hydraulic grapple rake manufactured by Colville, Washington-based AnBo Manufacturing, which specializes in high quality designed products for tractors, loaders, and skid steers. While their attachment operates like a bucket in that it can be raised and lowered, and rolled forward and backward, it has a third hydraulic function to open and close its jaws. With the ongoing beetle kill and the ever ending fire prevention tasks, Bob Chapman decided that he wanted a grapple rake for his own multi-terrain loader. Anbo Manufacturing was contacted and built the rake to fit his loader. A six-foot grapple rake with 6-inch tine spacing was decided upon. This would allow the dirt to sift through the rake's tines, but not brush and debris. Before to remove debris, Chapman used a 4WD tractor with bucket attachment He didn't like the results. "Because the bucket lacked finesse, it left holes and skinned spots that removed topsoil and made it difficult for decorative grassland to grow back." Chapman liked the results of the grapple rake, he continued, "Since the grapple rake just scrapes debris off the top and can back rake with accuracy, the grass grew back beautifully in one season." Chapman has also put the hydraulic grapple rake to good use for fire mitigation on a five acre, Nederland, Colorado property. While trying to clear a defensible space around the property before, he'd tried to remove flammable juniper ground spread and preserve the desired aspen. But as the juniper grew among rocky outcroppings, it had proved difficult. Proving difficult Chapman said, "I'd hired a crew to remove the juniper, but it was basically pickax,shovel, sweat and cuss." He continued, "You couldn't put a chainsaw to it because it grew among rocks and dirt. The needles went right through leather gloves. After two weeks of backbreaking labor, when they'd cleaned up less than 1/10 an acre, they finally quit." Turning to the grapple rake for help Chapman adds, "using the grapple rake, I was able to pull up the juniper by the roots so it wouldn't grow back -- right from its rocky outcroppings." He continues, "My loader has a push force of about 6,000 lbs, and several times I stalled it pushing on big rocks, but the grapple rake was fine. It's strong enough to handle whatever you throw at it." To satisfy the need for strength, AnBo uses a special type of steel that has twice the yield strength (resistance to bending) and a much higher Brinnell hardness rating (resistance to wear) than T1 steel. This makes the grapple rake light enough for mini or compact skid steers or tractors and also adding strength preserves that give more lift and payload capacity than similar products. With the grapple rake, Chapman single-handedly cleared a defensible space around his property. "I ended up taking out 215 cubic yards of slash and debris, and loaded it onto trailers in about 100 hours," he says. "It's great at back-raking, grabbing, stacking, piling, whatever you need. Not only did I save over $10,000 in labor, but also lowered my insurance from $23,000 to $4,000 annually. I don't know how I'd have done the job any other way." With thousands of trees toppled when Hurricane Katrina hit on Tom Hauptmann's property about 60 miles from New Orleans, it took him and his wife three days to make it to their mailbox from their driveway. Cutting and moving downed trees. While others were dragging trees with a tractor and chain, Hauptmann used a front-end loader with a 4-way clamshell bucket to accomplish the task. The inefficiency still frustrated him. Hauptmann explains, "I could pick up logs, but it was always dicey." He continues, "because the clamshell bucket had no teeth or curvature, I could pinch the logs but not really grip them. The load would slip out when it go imbalance, so it was slow going and I had to be careful. When a load slipped, it not only took extra time to pick it up, but also to clean up the debris left behind." While trying to dispose of the debris with burning, Hauptmann was dissatisfied with the buckets inability to rake leaves, and other debris with out scooping up dirt. Causing the piles to burn slowly, incompletely, or with too much smoke. Hauptmann decided to try the 6-foot, hydraulic AnBo grapple rake with 6-inch tine spacing. Hauptmann shared, "The grapple rake is strong enough to pick up anything your machine is capable of. "My limit is blowing out the tires on my front end loader." This grapple rake is strong enough to pick up and carry 40-foot sections of tree to 18-inches in diameter, he estimates also weighing up to 4,000 pounds. Finding it faster and easier than cutting logs into smaller sections, dragging or carrying them separately. With the grapple rake his control and grip are better and his ability to efficiently clean up and manage his property has increased. He is using the grapple rake to dig stumps and roots, pick up trees, logs, limbs, brush and debris. Explaining what Hauptmann likes he states, "unlike bucket jaws that essentially pinch,the grapple rake wraps around a load. Its teeth and curvature are better for grabbing and grasping. It operates like a hand and give much better control and holding power. You can grab so much more with the grapple rake." Accidently Hauptmann built a burn pile of trees and logs for disposal under a power line. learning about the grapple rake's efficient capacity. Knowing he had to move the pile, Hauptmann says, "With the bucket, such a job would've taken me 20 loads to finish." But, "With the AnBo grapple rake, it took me five loads to move the entire pile. It made a two-hour project into a 20-minute one." What can be done for "nuisance trees and brush?" Hauptmann states that the grapple rake is useful for quickly removing these that tend to have shallow roots. "I simply put the teeth down and rip out the roots and all so they don't grow back." To gather limbs, He simply slides the grapple rakes teeth along the ground until his load is big enough to move to the debris pile. Adding, "I could never do that with a bucket because things would slip and go every which way. Finding the grappling rakes' flexibility extends to pacing and shifting objects in the burn pile. Hauptmann finds it helps for a cleaner, less smoky and more complete burn. "I can pick up and replace items in the burn pile, shift ashes, whatever necessary to keep it burning properly," he says. Whether for logging, national park conservation, fire prevention or forest management, the grapple rake is making traditionally, tedious clean-up tasks faster, safer, and easier with its unique combination of strength, control, and flexibility. Those responsible for such work are finding that substituting its technology for costly, time-consuming labor is a good investment that continues to pay back, year after year.
Article Source: http://www.philvault.com
Anbo Manufacturing supplies high quality attachments for farm and construction equipment. Specializing in Hydraulic Grapples and Grapple Rakes, Anbo makes rugged attachments for all makes of loaders, tractors, skid steers and backhoes.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
